| MEASURING FABRIC TREATMENTS |
|
| Site Map |
|
| Fabric Panels |
- For width measurements for fabric panels, measure the width you would like to cover. For fullness, we add width to our Pinch Pleated and Euro Pleated Panels.
|
- Our Rod Pocket, Tab Tops and Unpleated Ring Tops are made without adding fullness. When adding for fullness, designers recommend doubling the flat width (or the width of the window that you are covering) then dividing by the number of panels needed.
|
- For the height, please measure the height that you would like to cover. Please note, the finished height will include the tab tops and pockets. We recommend ordering fabric panels for installation approximately 3" above the window.
|
| Fabric Panel Details |
-
Rod Pocket Panels
A contemporary, no fuss style that fits directly over wood or iron rods and gathers for a casual look. Please add on extra fullness for both stationary and non-stationary panels. We suggest 2 times the area that each panel will cover.
|
-
Tab Top Panels
Clean and simple, the tab top adds a note of relaxed warmth to more formal rooms. The tabs are constrcuted separately and sewn into the top seam. Our Tab Tops are made without fullness. Please add fullness by multiplying the flat width of each panel by 2.
|
-
Unpleated Ring Tops
A pleat with a modern feel, our ring top is the choice for a new traditional look! Rings are placed 9" to 11" apart. They are finished with pin hooks to attach to decorative rings or traverse rods, please specify when ordering. Our Unpleated Ring Top is made without fullness. Please add fullness by multiplying the flat width of each panel by 2.
|
-
Euro Pleated Panels
For the ultimate designer's touch - our Euro Pleat is meticulously sewn in tri-fold pleats and gathered at the top of the pleat. We make these panels at 2 1/2 times the ordered with (or 250% fullness) for the most graceful drape. This style can be used with rings or mounted on a traverse rod, please specify when ordering.
|
-
Pinch Pleat Panels
Luxurious pleats make this style an all time favorite. Simple and timeless, a great choice for any room. Our pinch pleats are built with fullness at 2 1/2 times the ordered with (or 250% fullness) for a true custom look. This style can be used with rings or mounted on a traverse rod, please specify when ordering.
|
| Fabric Valances |
-
Outside Mount
To measure for fabric valances to mount outside of your window casement or trim, measure the width that you want to cover. Then add 2'' to the width to accommodate installation brackets. If valance is being layered over another treatment, request 5-1/2'' returns for greater clearance.
|
| Fabric Shades |
-
We highly recommend outside mount applications only for Fabric Shades due to the nature of fabric. The Carlisle and Thornhill are not recommended for inside mounts because the sides of the shades are not completely straight due to the construction of the shades. Light gaps will be noticeable on inside mounts. These two styles are not as tailored as the Braemar, Glencoe or Stonehaven and may require more dressing when they are raised or lowered.
|
