|
With proper installation and care, your new Honeycomb shades will provide many years of beauty and performance.
To install HoneyComb Continuous Cord Loop shades, you'll need a few basic tools:
Measuring Tape
Power Drill and Drill Bits
Long Flat Blade Screwdriver
Phillips Screwdriver
Scissors
You'll also need a supply of fasteners to
attach the installation brackets or swivel brackets. Sheet metal screws
work well with both wood and aluminum. Expansion or toggle bolts are
required with non-solid surfaces, such as drywall or lath and plaster.
|
| Installation brackets are attached
either inside or outside the window casement, depending upon whether
the shade was ordered as an inside mount or an outside mount.
In addition to the installation brackets, other components may be
needed to install your shades. On outside mounts, spacer blocks or
extension brackets can be used with installation brackets to allow
the shade to clear obstructions.
 Optional hold down brackets can be
used to prevent the bottom of the shade from swaying. The installation
hardware you received with your Honeycomb shades was determined at
the time the shades were ordered, based upon your installation needs.
The Honeycomb Continuous Cord Loop installation
instructions are organized into three simple steps-as easy as 1, 2,
3. Before you begin, please read the instructions all the way through
to gain a basic understanding of the recommended installation procedures.
|
|
